非柔性连接石化储罐配管温差应力分析与对策

储罐配管在温差作用下产生热位移会导致管壁产生热应力，未采用柔性连接的配管由于热应力集中作用可能发生破漏。针对与石油化工储罐非柔性连接的配管的安全问题，应用ANSYS有限元分析软件模拟计算石化企业典型配管的热应力分布；根据不同类型配管的分析结果，提出了工程技术与管理方面的针对性安全措施。研究结果表明:温差效应对石化储罐配管热应力影响显著，随内外温差的增加，配管应力集中的区域增大，最大热应力值增大；补偿措施能够改善配管的柔性，降低配管应力；约束载荷限制配管热膨胀从而增大配管应力；三通管是多根配管接合的区域，这种复杂管道交汇处会形成明显应力集中。研究结果对于提高石油化工非柔性连接配管安全性有一定的指导意义。     

Mitigating Impact of Devils Lake Flooding on the Sheyenne River Sulfate Concentration

Devils Lake is a terminal lake located in northeast North Dakota. Because of its glacial origin and accumulated salts from evaporation, the lake has a high concentration of sulfate compared to the surrounding water bodies. From 1993 to 2011, Devils Lake water levels rose by ~10 m, which flooded surrounding communities and increased the chance of an overspill to the Sheyenne River. To control the flooding, the State of North Dakota constructed two outlets to pump the lake water to the river. However, the pumped water has raised concerns about of water quality degradation and potential flooding risk of the Sheyenne River. To investigate these perceived impacts, a Soil and Water Assessment Tool (SWAT) model was developed for the Sheyenne River and it was linked to a coupled SWAT and CE‐QUAL‐W2 model that was developed for Devils Lake in a previous study. While the current outlet schedule has attempted to maintain the total river discharge within the confines of a two‐year flood (36 m³/s), our simulation from 2012 to 2018 revealed that the diversion increased the Sheyenne River sulfate concentration from an average of 125 to >750 mg/L. Furthermore, a conceptual optimization model was developed with a goal of better preserving the water quality of the Sheyenne River while effectively mitigating the flooding of Devils Lake. The optimal solution provides a “win–win” outlet management that maintains the efficiency of the outlets while reducing the Sheyenne River sulfate concentration to ≤600 mg/L.     

2013年苏州春季一次重污染天气的过程分析

研究了2013年3月在江苏范围内的一次重污染天气过程，重点分析苏州在此次污染过程中大气污染的变化特征。污染过程中，苏州市颗粒物浓度上升较为明显， PM10的小时质量浓度最高达548μg／m3， PM2．5质量浓度也达到197μg／m3，污染持续时间为2 d，3月8—9日当地空气质量均达到中度污染水平。根据后向轨迹模型、颗粒物离子浓度的分析，此次污染是由外来浮尘及苏州本地污染物排放所造成的区域霾污染影响所致。根据监测结果与实际污染特征，针对性地提出了对策和措施。     

The Metallic Composition of Aerosols at Three Monitoring Sites in Korea During Winter 2002

In the present study, the distribution patterns of various metals were analyzed and compared using PM samples collected concurrently from three monitoring sites located in Korea (Seoul, Busan, and Jeju island) in December 2002. As these sites can represent metal pollution with different degrees of anthropogenic activities, their concentration levels were distinguished in a systematic manner in the order of Jeju, Busan, and Seoul. By comparing the present data sets with those measured previously from other locations in Korea and around the world, we attempted to diagnose the general status of elemental pollution on the Korean peninsula. Through an application of different statistical approaches, the major processes controlling elemental levels were assessed for each of the three study sites. The results indicated the importance of both crustal and anthropogenic sources in all sites with their relative roles varying significantly from each other. The results of the metal analysis data, when examined in relation to back trajectory analysis, confirmed that their concentration changes are affected quite sensitively with air mass movement patterns. The overall results of this study consistently indicated the contribution of a strong anthropogenic source area (e.g., China) to the observed metal concentration levels in the study area, but the strengths of such signals vary considerably across the Korean peninsula.     

Evaluation of the temporal variations of air quality in Taipei City, Taiwan, from 1994 to 2003

Data collected from the five air-quality monitoring stations established by the Taiwan Environmental Protection Administration in Taipei City from 1994 to 2003 are analyzed to assess the temporal variations of air quality. Principal component analysis (PCA) is adopted to convert the original measuring pollutants into fewer independent components through linear combinations while still retaining the majority of the variance of the original data set. Two principal components (PCs) are retained together explaining 82.73% of the total variance. PC1, which represents primary pollutants such as CO, NO(x), and SO(2), shows an obvious decrease over the last 10 years. PC2, which represents secondary pollutants such as ozone, displays a yearly increase over the time period when a reduction of primary pollutants is obvious. In order to track down the control measures put forth by the authorities, 47 days of high PM(10) concentrations caused by transboundary transport have been eliminated in analyzing the long-term trend of PM(10) in Taipei City. The temporal variations over the past 10 years show that the moderate peak in O(3) demonstrates a significant upward trend even when the local primary pollutants have been well under control. Monthly variations of PC scores demonstrate that primary pollution is significant from January to April, while ozone increases from April to August. The results of the yearly variations of PC scores show that PM(10) has gradually shifted from a strong correlation with PC1 during the early years to become more related to PC2 in recent years. This implies that after a reduction of primary pollutants, the proportion of secondary aerosols in PM(10) may increase. Thus, reducing the precursor concentrations of secondary aerosols will be an effective way to lower PM(10) concentrations.     

Extension of the EUROS Integrated Air Quality Model to Fine Particulate Matter by Coupling to CACM/MADRID 2

The European Operational Smog (EUROS) integrated air quality modelling system has been extended to model fine particulate matter (PM). From an extended literature study, the Caltech Atmospheric Chemistry Mechanism and the Model of Aerosol Dynamics, Reaction, Ionisation and Dissolution were selected and recently coupled to EUROS. Currently, modelling of mass and chemical composition of aerosols in two size fractions (PM_2.5 and PM_10–2.5) is possible. The chemical composition is expressed in terms of seven components: ammonium, nitrate, sulphate, elementary carbon, primary inorganic compounds, primary organic compounds and secondary organic compounds. Calculated PM₁₀ concentrations and chemical composition are presented for two summer months of the year 2003 (1 July to 31 August).     

不同低碳氮比废水中好氧颗粒污泥的长期运行稳定性

为了研究好氧颗粒污泥系统处理低碳氮比废水的长期运行稳定性,采用低碳氮比（C/N）条件下逐步增加碳氮负荷的进水方法,分别在反应器A和B中接种好氧颗粒污泥,考察其长期运行过程中的理化性质、处理性能及应对冲击负荷的稳定性.其中A反应器的碳氮比一直维持在2,而B则由4逐步降至2.结果表明,在4℃存储30d的好氧颗粒污泥,经过25d的培养,其活性基本恢复,A、B反应器化学需氧量（COD）和氨氮（NH₄⁺-N）的去除效率均达到90%以上.在其后的稳定阶段,B反应器COD和NH₄⁺-N去除率达到90%以上,实现了完全硝化;而A反应器COD去除率仅80%左右,虽然NH₄⁺-N去除率最终也达到90%以上,但仅实现短程硝化.在冲击负荷阶段,A和B反应器COD去除率仍维持在80%以上,但是NH₄⁺-N去除受到很大冲击.A反应器NH₄⁺-N去除效率恶化,B反应器仅实现了部分硝化.整个运行过程,好氧颗粒污泥的物理性质受到的影响不大,A和B反应器的污泥容积指数（SVI₃₀）分别维持在60 mL ·g^-1和75 mL ·g^-1左右,混合液悬浮固体（MLSS）在5g ·L^-1和3.7g ·L^-1左右.颗粒污泥微生物群落分析表明,B反应器相对于A反应器丰富度和多样性更高.同时B反应器具有更高丰度的Zoogloea属,在颗粒中能产生更多的胞外蛋白促使颗粒结构更稳定,保证系统的长期稳定运行.以上结果表明,与C/N为2的好氧颗粒污泥系统相比,C/N为4的系统脱碳硝化效果好,抗冲击负荷能力强,更有利于颗粒污泥的长期稳定运行.     

基于OMI数据的东南沿海大气臭氧浓度时空分布特征研究

基于臭氧监测仪(OMI)卫星反演数据,对2005—2018年东南沿海5省区域大气臭氧柱浓度数据进行提取及分析,探讨其时空分布格局及影响因素.结果表明:①在时间变化上,14年间,该区域大气臭氧柱浓度整体呈先上升后下降的趋势,2005—2013年臭氧柱浓度持续升高,最高值为324.52 DU,高值区不断向南部区域扩大;2013—2018年臭氧柱浓度呈下降趋势,最低值为228.27 DU,但在2017、2018年略有上升.②在空间分布上,臭氧柱浓度自北向南逐渐降低,高值区集中分布在江苏及浙江省北部;低值区集中于福建省南部及广东省大部分地区.③在季节变化上,大体呈现出春夏季高于秋冬季,高值区在春夏季交替出现,秋季略高于冬季,但差异不明显.④稳定性分析表明:研究区臭氧柱浓度整体呈现中部分散、南北部集聚、差异较显著的分布格局.⑤自然因素中,风向、气温均呈现显著正相关,江淮地区的梅雨季节(降水)及华南地区的台风和暴雨也起到显著作用.⑥人文因素中,臭氧柱浓度与地区生产总值、各产业生产总值及机动车保有量均表现出正相关,其中,臭氧柱浓度与第二产业的相关度最高.另外,臭氧柱浓度与NO_x排放量表现出显著相关性.VOC_s对臭氧柱浓度的影响中,工业源是主控因素,交通源和居民源次之,电厂源对臭氧柱浓度的影响最弱.这进一步说明臭氧浓度的变化受到了诸多因素的综合影响,但气温、NO_x及VOC_s的排放是臭氧浓度变化的主导因素.     

成都市大气颗粒物粒径分布及其对能见度的影响

使用环境颗粒物分析仪（GRIMM180）对成都市2018年10月—2019年9月0.25~32 μm的大气颗粒物数浓度粒径分布进行观测,结合细颗粒物（PM_2.5）质量浓度以及相对湿度（RH）、能见度、降水量等气象要素数据,分析了成都市大气颗粒物粒径分布及其与能见度的关系.结果表明,观测期间成都市大气颗粒物以细粒子为主,0.25~0.5 μm的粒子数浓度占总数浓度的97.75%,数浓度谱呈单峰分布,2018年秋季、2019年夏季表面积谱呈双峰分布,2018年冬季、2019年春季表面积谱呈三峰,体积谱均为三峰分布;在不同RH区间,PM_2.5质量浓度及数浓度均与能见度呈负相关,且其中0.25~0.5 μm粒径段的细颗粒物因为对可见光波段的米散射效应而对能见度产生较大影响;在不同RH情况下,不同粒径段颗粒物数浓度对能见度的影响程度有所差别：在低RH（<70%）下,0.25~0.3 μm粒径段粒子数浓度对能见度影响最大;在中等RH（70%~80%）下,0.3~0.5 μm粒径段粒子数浓度对能见度的影响最大;而在高RH（>80%）下,0.3~0.5 μm和0.5~1 μm粒径段粒子数浓度对能见度影响相当.     

深圳市秋季大气臭氧立体分布特征

利用大气O₃探测激光雷达在深圳市东部生态区和西部城区同步开展垂直观测,探究了2018年深圳市O₃立体分布在秋季光化学污染活跃期至冬季非活跃期的演变过程.结果表明：光化学反应活跃的10月,东部地面O₃浓度相对于西部地面高出约128%;地面向上至450m,O₃浓度在东部生态区发生快速降低,而在西部城区由于存在“滴定效应”,O₃浓度随高度升高而升高;450m~2km,东、西部O₃浓度均随高度升高而降低,西部城区O₃浓度水平超过东部生态区约30%;2km以上高空,东、西部O₃浓度趋同（70μg/m³）,并保持稳定,为具深圳市秋季O₃污染过程提供了较高的大气背景浓度.高污染期间,深圳市大气边界层内O₃浓度变化较为一致,西部高空的O₃区域传输作用更加显著.秋季至冬季光化学反应逐渐减弱,深圳市O₃浓度的水平和垂直空间差异逐渐减小,冬季的深圳市O₃污染基本受大气背景控制.